Crystopyra is available in four models: Model X1, Model X2, Model X3 and Model X4. Each model is used as a Vastu remedy product for rectification support, with Model X4 positioned as the most powerful model in the current range.
The Crystopyra range is designed for practical Vastu rectification where a non-demolition remedy product is required. The model selection depends on the intensity of the defect, size of the area, property type and rectification requirement.
Crystopyra is not presented as a decorative pyramid. It is a Vastu remedy product recommended for specific correction needs in homes, offices, shops, factories, plots and commercial premises.
Each model belongs to the same Crystopyra product family, but the strength and intended rectification intensity increases from X1 to X4.
Model X1 is the basic Crystopyra model. It may be considered where the Vastu rectification requirement is comparatively light and the product is needed for general support in a defined area.
Model X2 is stronger than X1 and may be used where the Vastu rectification requirement is more active. It is suitable when the area needs a stronger product response than the basic model.
Model X3 is an advanced Crystopyra model for stronger Vastu rectification requirements. It is suitable for more sensitive areas, heavier defects, or stronger product support.
Model X4 is the most powerful Crystopyra model in the current range. It is positioned for high-intensity Vastu rectification requirements where the strongest product support is preferred.
Crystopyra models are used in sets. One set contains 9 pieces. For the selected area, 5 sets are required: one set in each corner and one set in the middle.
Each Crystopyra set contains 9 pieces. This set-based structure is used to create a defined product arrangement for the selected area.
For the area where Crystopyra is being placed, 5 sets are required: one set in each of the four corners and one set in the middle.
The 5-set arrangement gives a clear product pattern for the selected area: corner support on all four sides and a central set in the middle.
Total for one selected area: 5 sets × 9 pieces = 45 Crystopyra pieces.
Send your enquiry for Crystopyra Model X1, X2, X3 or X4. Mention your property type, requirement and the model you are interested in.